CUMMINS N14 Spécifications télécharger pdf (Page 112)

100

101

Turn the lubricating oil pump drive gear by hand as far as

it will freely move, and set the dial indicator to ‘‘0’’ (zero).

Turn the lubricating oil pump drive gear by hand in the

opposite direction as far as it will freely move, and read

the dial indicator.

Backlash Between the Lubricating Oil Pump Drive Gear

and the Camshaft Gear

mm in

0.05 MIN 0.002

0.50 MAX 0.020

If the backlash is not within specifications, the lubricating

oil pump drive gear must be replaced.

Gear Cover - Installation

Install one 7/16-20 X 4-inch guide stud in each side of the

gear cover mounting flange to align the cover.

Install the gear cover gasket over the guide studs and the

dowel pins.

NOTE: Use a film of LubriplateT 105 or its equivalent or

grease to hold the gear cover gasket in place, if necessary.

Install the gear cover. Install and tighten the mounting

capscrews in the sequence shown.

Torque Value: 68 N•m [50 ft-lb]

Gear Cover - Installation Engine Assembly (00-02)

N14Page 0-92

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 586 587

Commentaires sur ces manuels

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Spécifications Page 112

Commentaires sur ces manuels