CUMMINS QC5200 Guide de l'utilisateur télécharger pdf (Page 23)

Installing QC5200 PC Software

To install your QC5200 PC Software, please follow the instructions

below:

1. Insert the QC5200 Application Suite CD into your CD ROM

drive.

2. Find and run the installation file called:

QuickCheck.exe

3. Follow the instructions on the screen

4. When the installation program is ready, please start the

application called SyncReports by clicking:

Start



All Programs



Cummins



Cummins

QuickCheck



Launch SyncReports

5. This will launch the installation program for Microsoft Active

Sync or Windows Mobile Device Center, unless it was already

installed, please follow the instructions on the screen. When the

installation is complete, please connect your QC5200 device to

your PC using the USB connector.

6. The PC will now automatically recognize the device as a USB

serial device but it still needs to install some drivers. Please

follow the instructions on the screen and choose to

automatically find and install drivers for the device.

7. After the drivers are installed, you are ready to synchronize the

QC5200 device with the PC. Do this by simply disconnecting

and then reconnecting the USB cable between the QC5200

device and the PC. This will automatically start the SyncReport

application, which will handle the synchronization and possible

updates of the QC5200 software.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 88 89

Pas de commentaire

CUMMINS QC5200 Guide de l'utilisateur Page 23